Plastic Fruits Clamshell Packing Box Egg Tray Water Coffee Milk Cup Container Dish Lid Vented Clamshell Thermoforming Forming Making Machine
BRIEF HF-IM thermofomring machinery is a trim-in-place type thermoforming machine which takes advantage of mould with ru
Basic Info
Model NO. | LX3122HF-IM-C203 |
Dry Run Speed | 40cycles/Min Max. |
Film Thickness | 0.2-2mm |
Sheet Width | 800mm Max. |
Suitable Material | PP PS Pet PVC BOPS |
Air Pressure | 0.7MPa |
Production Range | Container, Clamshell ,Tray and Lid |
Automaticity | Forming, Cutting, Stacking and Conveying |
Cooling Water Consumption | 13 Liters/Min 15° - 20°c |
Transport Package | Plastic Film with Anti-Rust Oil |
Specification | 1200*2600*2500mm |
Trademark | LXPLASTICS |
Origin | China |
HS Code | 8477409000 |
Production Capacity | 20sets/Year |
Product Description
BRIEF
HF-IM thermofomring machinery is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.it is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.
Design Feature
thermofomring machinery Use Steel-Rule-knife for performing forming and cutting in the same stationTrim-in-place for processing PP PET PS PVC BOPS material etc. specially perfect for PP . Second cut-press and Third cut-press are available for hole punching and post-trimAutomatic stacking ,counting unit and conveying system Trim-in-place for parts with rolled edge (turn-down lip) Technology of trim-in-place brings a neat and identical trimming(cutting) Plug assistant for deep forming of draw Floating knife and free knife are available for post-trimming film with high shrinkage rate. Extra Contact Heat plate for Minimizing power consumption is available.
Specification | LX3122IM |
Mould Area | 800*600mm Max |
Depth of Draw under sheet | 120 mm Max |
Depth of Draw above sheet | 30mm Max/120mm Max |
Clamping force | 750KN |
The Second Cut-Press | Available |
The third Cut-Press | Available |
Suitable material | PP PET PS PVC BOPS |
Sheet Width | 460- 850 mm |
Material Thickness Range | 0.2-1.5mm |
Material Roll Diameter | 1000 Max |
Dry run Speed | 45cycles/min Max. |
Power Supply | 3-N AC380V±15V ,(others at request) |
Power Consumption | Approx.35kilowatts/hr |
Air Pressure | 0.7Mpa |
Air Consumption | 2500 Liters/min |
Cooling Water Consumption | 13 Liters/min 15° - 20°C |
Dimensions | 9.5m*2.2m*2.2(L*W*H) |
Trim-in-place IM-2in1 |
Trim-in-place with second cut-press IM-3in1 (optional) |
Trim-in-place with second cut-press and third cut-press IM-4in1 (optional) |
Service |
Send to us